Sage 50 [microsoft][odbc Driver Manager] Data Source Name Not Found And No Default Driver Specified Error Troubleshooting

Sage 50 [Microsoft][ODBC Driver Manager] Data Source Name Not Found 

Data Source Name Not Found . In reference to the blunder: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver determined. If the user doesn’t have advance computer's operating system knowledge, then connect to Sage Support Phone Number only for ODBC related problem & issues. That mistake implies that the Data Source Name (DSN) you are determining in your association arrangement isn't being found in the windows vault. It is imperative that your ODBC driver's executable and connecting position (ELF) is equivalent to your application. As it were, you require a 32-bit driver for a 32-bit application or a 64-bit driver for a 64-bit application. In the event that these don't coordinate, it is conceivable to design a DSN for a 32-bit driver and when you endeavor to utilize that DSN in a 64-bit application, the DSN won't be found in light of the fact that the vault holds DSN data in better places relying upon ELF (32-bit versus 64-bit). Make sure you are utilizing the right ODBC Administrator instrument. On 32-bit and 64-bit Windows, the default ODBC Administrator device is in. . Be that as it may, on a 64-bit Windows machine, the default is the 64-bit variant. On the off chance that you have to utilize the 32-bit ODBC Administrator instrument on a 64-bit Windows framework, you should run the one found here: C:\Windows\SysWOW64\odbcad32.exe. Where I see this entangling individuals is the point at which a client utilizes the default 64-bit ODBC Administrator to arrange a DSN; supposing it is for a 32-bit DSN. At that point when the 32-bit application endeavors to associate utilizing that DSN, "Information source not found." happens. It's additionally vital to ensure the spelling of the DSN matches that of the arranged DSN in the ODBC Administrator. One letter wrong is everything necessary for a DSN to be bungled. c:\Windows\System32\odbcad32.exe. I have done broad research on this blunder without any result. Any recommendations would be significantly refreshing.  

                                                       

                                                      [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified . An issue was experienced while endeavoring to sign into or make the generation database. Subtleties: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver determined. In my ODBC administrator, I have a rundown of User DSN's and System DSN's. I am endeavoring to open a program out of the blue on Windows XP Pro that utilizes PostgreSQL 9. I'm getting a blunder message that says : I had a go at introducing a postgres odbc driver to check whether that would help, yet it didn't. In the event that despite everything anybody looking through the answer for this issue, begin R&D from ODBC Driver area. Check if the driver you determined is there or not. There is a connect.dat document in the program record with a line saying "OLE DB Provider MSDASQL". Changing this section modifies the mistake message I get to "Supplier can't be discovered, it may not be appropriately introduced". I don't recognize what supplier name to embed to motivate this to work legitimately.

Solved Sage 50 [microsoft][odbc Driver Manager] Data Source Name Not Found

• Data Source Name Not Found And No Default Driver Specified Linux
• Odbc Driver Error
• Odbc Driver Manager Data Source Name Not Found And No Default Driver Specified Windows 8Odbc Driver Not Found In Windows 7 

"Data Source Name Not Found And No Default Driver Specified" When Trying To Connect" 

Confronting the accompanying blunder when testing the association with MySQL from Replicate: RetCode: SQL_ERROR SqlState: IM002 NativeError: 0 Message: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver determined [122502] ODBC general mistake.   

1. They don't have the ODBC customer introduced (This is for the 64 bit adaptation)- Run C:\Windows\System32\odbcad32.exe Check that the driver is recorded under the drivers list: 
2. On the off chance that the client is stating that he/she do have it introduced and he/she doesn't see how it isn't recorded – This may be on the grounds that he/she has the 32bit variant of the customer.
3. To watch that – The procedure is equivalent to in (1) yet you should open the 32 bit ODBC Data source Administrator: 
4. C:\Windows\SysWOW64\odbcad32.exe 
5. Another clarification is, that they have an alternate adaptation of The ODBC Driver (Client) than the one we're looking for– 5.2. 
6. Much of the time The ODBC customer name isn't indicating the Version as a piece of the name – MySql is unique, and it specifies that – "MySQL ODBC 5.2 Unicode Driver" 
7. To beat that issue, simply indicate the correct driver name on Replicate: Managed database > Advanced > Check "Abrogate… " > type "Driver = <ODBC Driver name> Precedent:

ERROR: Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified" while running Sage Intelligence.

Products:

• Sage Intelligence

Description:  "The blunder returned was :Microsoft][ODBC Driver Manager] Data source name not found and no default driver determined" while running Sage Intelligence."

Disclaimer Operating System Warning:  This arrangement requires propelled information of your PC's working framework. Contact your framework manager for help. Changing your Windows Registry erroneously can seriously influence framework tasks. Sage isn't in charge of activity issues caused by mistakenly changing your Windows Registry. Continuously make a reinforcement of your information before continuing with cutting edge arrangements.

 Resolution:

• In the 32bit ODBC Administrator on the drivers tab, the SQL Server driver was recorded yet had no adaptation or document recorded. Subsequent to attempting to reinstall SQL, I at long last altered the library section. The document way was absent. 
• For Windows 64-bit, the library section is HKey\LocalMachine\Software\WOW6432Node\ODBC\ODBCINST.INI\SQL Server.
• The string an incentive for Driver ought to be: %WINDIR%\system32\SQLSRV32.dll 
• Business Intelligence utilizes the SQL Server driver, however does not require a DSN setup. 

Microsoft ODBC Driver Manager Data Source Name Not Found And No Default Driver Specified

 

1. In the event that you continue running into this blunder on the 64 bit forms of windows, ie server 2008 recall this: 
2. In a 64 bit windows server working framework, there are.

Two ODBC Managers

• When you pull up the typical menu for the odbc/dsn system,it is for the 64 bit odbc supervisor, 
• also, 32 bit applications (vb 6.0, PHP 5) won't work utilizing these dsn's. 
• This is the place the 32 bit odbc supervisor is: 
• C:\Windows\SysWOW64\odbcad32.exe

Please check the data source connection type and connection string. This can be done with the following instructions.

1. Open the report utilizing Report Manager. 
2. Go to Properties tab and select Data Sources in the left board. 
3. On the off chance that the report utilizes a custom information source, check the association type and association string. 
4. In the event that the report utilizes a common information source, you can open the information source concurring the area on the report server. At that point check the association type and association string on Properties tab.

Connecting To Your Sage 50 Data Using ODBC

Certain projects, for example, Microsoft Excel or Access, enable you to associate with your Sage 50 organization information utilizing ODBC. This enables you to make reports utilizing your organization information specifically from these projects. To do as such, pursue these means:

• Select Start, Settings, Control Panel, Administrative instruments, Data Sources (ODBC). 
• Note: If you have a 64 bit working framework, you should run the 32 bit variant of the program, odbcad32.exe. This record is regularly found in C:\Windows\SysWOW64. The SysWOW64 envelope area might be diverse relying upon how Microsoft Windows was introduced. 
• On the ODBC Data Source Administrator window, click Add. 
• Select Pervasive ODBC Engine Interface. 
• Snap Finish. 
• Enter a Data Source Name. 
• In the Database Name field, find and select your Sage 50 Company database. 
• Snap OK. twice. 
• In the program you need to utilize, you'll have to associate it to this new ODBC database. In Microsoft Excel 2007 and higher, the means would be as per the following. 
• Open Microsoft Excel. 
• On the Data tab, in the Get External Data gathering, click From Other Sources, at that point click From Data Connection Wizard. 
• On the Data Connection Wizard window, select ODBC DSN and snap Next. 
• Discover the database you made in the means above and click Next. 
• Enter the User Name (ID) and Password that was set up to enable access to organization information from outside of Sage 50. This is set up on the Data Access/Crystal Reports tab in Maintain Users in Sage 50. The User Name (ID) is dependably Peachtree. 
• Snap OK.. 
• Select the table you need and snap Next. 
• Snap Finish. 
• On the Import Data window, click OK. 
• You will be incited for a secret phrase once again. Enter a similar secret word you entered in stage 5.
• Snap OK.

Causes Sage 50 [Microsoft][ODBC Driver Manager] Data Source Name Not Found

The typical blunder message is a somewhat unhelpful: "[Microsoft][ODBC Driver Manager] Data source name not found and no default driver indicated." A brisk method to discover the name of the troublesome information source is to "right snap" on the information territory inside the culpable worksheet and select "Information Range Properties". It's hard to resolve ODBC driver issue over the Sage Chat Support Live but agents can guide you and helpful resource for troubleshooting.  As far as I can tell, Microsoft Excel rushes to hurl a mistake when an information source does not exist on the nearby machine. Be that as it may, there will never be any point by point data inside the mistake message to prompt the client with respect to what precisely should be arranged. The simple best thing gives the name of the connection.It may not be a similar item mark that you have, notwithstanding; it is a conventional issue that is experienced when utilizing ODBC information source names. In reference to the OLE DB Provider bit of your inquiry, it seems, by all accounts, to be a comparable sort of issue where the application can't find the setup for the predetermined supplier. Got this blunder since I had the Data Source Name in User DSN rather than System DSN. The Problem may be from the driver name for instance rather than DRIVER={MySQL ODBC 5.3 Driver} attempt DRIVER={MySQL ODBC 5.3 Unicode Driver} you can see the name of the driver from organization instrument. The issue is the above driver just is 32 bit. I had exchanged visual studio testsettings document to 64 bit to test a 64-bit-just application. Changing back to 32 bit in the testsettings document settled the issue. I attempted the above however found my issue was I utilized a for the sake of the DSN I have multipled ODBC connectors one for every DB - to ensure I don't mix together information.